The Sunsynk Contour 1000 has a 1kW inverter with a 1kWh battery



Welcome to the Sunsynk Mobile Contour, a portable power source designed to provide power to
construction site technicians, vehicle mechanics, remote locations or simply environments both industrial and
domestic, where power supply is non-existent or unreliable. Each trolley is fitted with two wheels and two
rubber feet to keep the trolley firmly in place once located to a useful position.

The Contour 1000 [921.6Wh] (The product you are currently viewing)
The Contour 2000 [1843.2Wh]

Both versions make use of a 1kW Pure Sine Wave Inverter with the difference being in the battery capacity per
model. Therefore, the Contour 2000 can power more appliances for longer than the Contour 1000. In the case
of the ‘Contour 1000’ it is feasible to run a 100W appliance for 10hrs while the same device can run for 20hrs
with the Contour-2000!

Built-in Lithium Phosphate battery packs provide reliable and safe power storage. The built-in inverter allows
the Contour to be charged by AC Mains supply or from a DC Solar Array and can supply both AC and DC
power via its assorted sockets. Load level indication is provided by a row of LEDs, these will increase with the
load from green to orange, red LED’s indicate an overload and it is recommended to reduce the load to
prevent damage to the unit. Flashing red LED’s indicate that the unit has gone into safe mode, it will need to
be switched off and on to restore output. Please ensure loads have been removed during this operation to
prevent safe mode activation. Battery level indication is via a flow of LED’s that decrease as the charge
capacity of the unit decreases.

Model Name Contour 1000
Capacity 1000W PSW Inverter
250W MPPT Charger
250W AC Charger
Mains Input (Charge) AC 240V/50Hz
Max. Charging Current (Mains) 10A
250W AC Charger
Solar Panel Voltage Range 32V-60V
Max. Charging Current (Solar Panels) 10A
Solar Charger 250W MPPT
Outputs 2 x USB 5V 2A
1 x Type C – 18W
1 x DC 9V 1A
2 x DC 12V 1A
AC Outlet AC240V/50Hz
Case Material Steel
Weight 25kg
Inverter Peak Wattage 2000W (4S)
Inverter Nominal Max. Running Power 1000W
Max. Inverter Efficiency >92%
Current Harmonic Distortion <3%
Battery Type LiFePO4 Lithium Iron Phosphate Battery Pack
Battery Specification 1 x 25.6V – 36Ah – 921.6Wh Batterp Packs
Total Battery Capacity 921.6Wh


Sunsynk Contour Spec Sheet


There are no reviews yet.

Be the first to review “The Sunsynk Contour 1000 has a 1kW inverter with a 1kWh battery”

Your email address will not be published. Required fields are marked *